Plumbing . Maintenance Furthermore Care

If your garbage disposal is beginning to act up, or has completely stopped working, there are some simple steps which you can take to identify and fix the problem before calling in an expensive plumber, or replacing the unit. Many times the unit is simply jammed, or has some other fixable problem.

There are other skills plumbers need aside from being able to work with water. One of the most common things that a faucet repair on is fixing water lines.

If you find that the water line repair leak is in the supply line you will need to replace it or simply tighten it. Start by turning the water supply off and then flushing the toilet to get rid of the excess water. Now use the towels to dry the area so that it is easier for you to fix the leak. Use a wrench to loosen the hexagonal nuts on the supply line at the main end as well as the one which goes to the flush tank. Now use the replacement supply line which you have and tighten the bolt at the supply end first. Now adjust the length that you will need for the pipe to reach the flush tank. Once you adjust the length use a knife to cut the extra length and then tighten the hexagonal bolt at the other end.



After you have the stems out you should be able to find the washer on the "inside" end. If it is nicked, torn or brittle it is likely the cause of your drip. Even if it looks brand new, go ahead and replace it. You've already come this far. You can get replacement washers at almost any hardware store. Sometimes you may want to replace the whole stem, especially if the handle end is stripped out. It's best to just take the stem with you to the store and see if you can match it up. Most Do It Yourself stores have replacement stems for many popular brands. If your valve has a center diverter valve to switch the waterfrom the tub spout to the shower head the same process applies. Many times it is easier to replace the diverter stem than to repair it. This really depends on the design of the stem.

If you do experience a broken pipe, you must act quickly to prevent further water damage to your home or business. The first thing you must do is shut off the water immediately. Know where the water shut off valve is located and make sure all members of the household are aware of its location and how to shut it off.

Keep an eye on any leaks in and around the house. Inspect taps, pipes and your roof regularly. Watch for leaks and if you find them, get it water line repair as soon as possible.

Turn the water off at the main shutoff valve at the street. You should be able to take a pair of pliers(or your bare hands) and turn the valve at the water meter to shut off the water to your home. Once you have shut off the water you can cut the pipe around the leak and make the repair.

A qualified plumbing company will not hesitate to show you its insurance policy. Make sure they are fully insured. Check if they have liability insurance and workers' compensation. Needless to say, you are putting yourself in danger if you hire a plumbing company with no insurance. Plumbers in Reading shows you its insurance policy up-front, no need to ask. We want you to know that it takes its work seriously and covers all the basics.

Leave a Reply

Your email address will not be published. Required fields are marked *